Featured products

Engineered for a clean install and a great game.

  • 3-arm camera mount

    Three arms at the standard 18·2 / 17·11 positions — ~120° apart and deliberately offset from 12 o'clock so a dart in the 20 never blocks the next.

  • Integrated 360° light ring

    Even, shadow-free lighting around the entire board so the cameras always see your darts clearly.

  • No drilling, no soldering

    Everything connects with pre-made cables. Arms hold by magnets and a snug surround clamps it all together — your wall stays untouched.

  • Plug-and-play autoscoring

    Three pre-flashed cameras, an LED strip cut to length, USB hub and cabling — all the autoscoring electronics ready to plug in.

  • Bring your own board + surround

    Designed for any 17.75" / 45.5 cm bristle dartboard with a snug protection surround — Winmau, Unicorn, Target and others.

  • Step-by-step guide

    A short illustrated guide walks you through assembly, calibration and your first match on autodarts.io.
Button label

A closer look.

Everything but the dartboard and surround.

  • 3 × camera arms

    Each arm: upper leg + lower leg + cap. PLA, matte black, embedded magnets.

  • 3 × support arms

    Added stability for the camera arms. Optional — skip them if your protection surround is very tight.

  • 360° light ring

    Printed ring segment + connector to close the loop. Pre-cut LED strip in the channel.

  • 3 × USB cameras

    Tested and ready for autodarts.io.

  • USB hub + cabling

    Hub, all cables to the right length.

  • Mounting hardware

    Screws, clips and cable ties.

  • LED power adapter

    Plugs straight into a standard 220 V wall socket — adapter is built in.

  • Illustrated guide

    For assembly

  • Email support

    If you get stuck, we'll help.
Button label

How it works

  • 1. Fit the light ring around your surround

    The printed ring goes around the dartboard surround. A snug, tight surround is important — it's what holds everything firmly in place.

  • 2. Snap the three camera arms in place

    Each arm holds itself with built-in magnets at the marked positions on the ring. The tight surround clamps the whole assembly together — no screws, no tools.

  • 3. Plug in cameras and LEDs

    USB cables go to the included hub, the LED strip plugs into its adapter. That's all the wiring.

  • 4. Calibrate on autodarts.io

    Open the autodarts.io client, follow the on-screen calibration, and start your first game in under five minutes.
Button label

From box to first 180 in four steps.

FAQ

Common questions.

Is this an official Autodarts product?

No. The Mojos Dart Kit is an independent, community-built kit designed to work with the open autodarts.io platform. Not affiliated with Autodarts GmbH.

Which dartboards does it fit?

Any standard 17.75" / 45.5 cm bristle board with a regular surround — Winmau Blade 6, Unicorn Eclipse, Target Tour, and similar.

How do the camera arms stay in place?

Each arm has magnets embedded in the base that snap onto the dartboard's steel ring, and the arm is also fastened with a bracket to the LED ring. The dartboard's protection surround then sits firmly over the assembly and clamps everything in place. A tight, snug surround is important — without it, the magnets alone aren't strong enough to hold the arms securely. The kit also includes 3 support arms for extra stability — if your surround is very tight, you can skip them.

Do I need a computer?

Yes — autodarts.io needs a host machine (Windows, macOS, Linux or a Raspberry Pi). The kit plugs into it via USB.

How long does shipping take?

Each kit is printed to order. Typical lead time is 5–10 business days, plus shipping.

What if something breaks?

Email me. Printed parts are easy to replace, and I'll send a new one at cost.